XYEHS WG7053F Emergency Shower & Eyewash Station Combination, Emergency Eye Wash Station Safety Shower Eye & Face Washer Station, Stainless Steel Bowl & Eyewash Sign

Specifications:

Features:

• High Quality & High Performance: AES plastic has weather resistance properties and applies to indoors or outdoors; With good acid proof, alkali prevention performances, 304 SS is ideal for harsh environment, complying with ANSI Z358.1-2014. Eye wash station can be installed outdoors or indoors, can be effectively used 0.3 million times.
• Eye & Face Washing Station: The spray heads have a built-in filter to filter impurities in the water, providing a comfortable stream and hand free operation condition, which make sure 15 min safety eye washing time to protect hurt eye during emergency.
• Emergency Shower: When shower is needed, pull down the shower rod with triangular handle, then emergency shower can be gotten. The shower head delivers a large volume flushing fluid spread evenly in a precise pattern and controlled flow rate. This emergency shower station was suitable for place where water pipe is available.
• Compact Design: The equal length of main pipes makes packaging more compact so that helps to save space and cost; Equiped with flat washer in quick coupling to prevent leakage between joints and fitting.

Combination Unit:

1. Valve mechanism activates in one second or less; It stays open until manually closed.(Section 4.2,5.2,6.1.4,6,2)
2. Be connected to a system capable supplying adequate flushing fluid when all components are oprated simultaneously,(Section 4.5.5,7.4.4)
3. Height of the flushing fluid column pattem shall be between 82″(208.3cm) and 96″(243.8cm) above floor. (Section 4.1.3,4.5.4)
4. Watersupply shall be sufficient to supply at least 20GPM (75.7LPM) for 15 mimutes. (section 4.1.2,4.5.5)
5. Valve actuator shall be located not more than 175.3cm (69″) above floor. (section 4.2)
6. The diameter shall be minimum of 50.8cm (20″) at 152.4cm (60″) above floor. (section 4.1.4)
7. Center of the flushing fluid patterm shall be at least 16″(40.6cm) from any obstruction.(Section4.1.4,4.5.4)
8. Water flow pattren shall be positioned between 33″(83.8cm) and 53″(134.6cm) from the level on which user stands and 6″(15.3cm) minimum from the wall or nearest obstruction.(Section 5.4.4,6.4.4)
9. Deliverd at least 3.0 gallons(11.4liters) of water per minute for 15-minute (Section 6.1.6,6.4.5)
10. Construted of materials that will not corrode in the presence of the flushing fluid (Section 7.1.1,7.1.2,7.1.3)
11. Located 10 seconds or 55 feet from contaminants or hazardous materials, Locate on the same level as hazad and free of obstructions.(Section 7.4.2,B5)
12. Protect nozzle head from airborne contamination, dust covers shall be removed by water flow immedlately (Section 5.1.3,6.1.3)
13. Provided fushing fluid to both eye and face simultaneously at a velocity low enough without injury to skin (Section 5.1.1.6.1.1)